Gallery: Red Water

Comments

Very nice, but how was it done?

Alex Koloskov
Pixiq Expert

Here is : the master class

Excellent - thanks!

I have done quite a few water drops, water drop collisions, fruit drops into water, etc. I haven't tried just tossing the water yet. I had thought of it, but my wife isn't very thrilled about the mess that would result. I like your kid's wading pool idea to catch the flow. :)

BTW, you note the problems you have with studio strobes. They are all way too long duration for this stuff (my Einstein flashes are also still on backorder). I found the solution is to use pocket flashes. My Canon 580EX II will get down to 1/35,000 second duration, as measured by my StopShot. My AlienBee B400 and B800 units won't go below about 1/3,000 second (see http://alienbees.com/b800.html to note how the duration actually INCREASES as power decreases, due to the way the power is reduced).

I have also measured the duration of cheapie Vivitar 285HV flashes to go as short as 1/30,000 sec, which is good for this type of shot. Amazon sells those for $90 new, and they also sell power supplies to be able to plug them into the wall for about $40 (saving battery cost and hassle).

Here is an example from my setup, using Canon 580EX II flashes.

Alex Koloskov
Pixiq Expert

Yes, I was using 3 Speedlites (580 and 430) to get these shots done.
It works fine for small splashes, but the problem begins when you need more power to cover a larger area; flash duration from speedlites become too long if more then 1/4 power used.

Now I use my Einsteins, great light with great stopping power (test shot: Einstein 640 V2 in-studio flash duration test: hi-speed strobe was never affordable like this. )

Thank you!

Post new comment

Pixiq on Facebook

Join the 10192 Pixiq fans on Facebook

Share

  • Share

Subscribe

Get weekly updates from Pixiq. Short, sweet, and always interesting.